Disc ball machine

Advantage characteristics:

　　1. The ball forming machine consists of a large plate, a large gear, a transmission part, a frame, a base, a scraper frame, and a powerless scraper.

　　2. The structure of the ball forming machine is novel and reasonable, the weight is reduced, and the height is lowered. The process layout is flexible and convenient, suitable for the transformation of old factories.

　　3, using a unique combination of non-powered scraper to reduce auxiliary power consumption.

　　4. The market consists of a disk and a disk section. Reduce the main motor power. The disc section can be adjusted up and down along the disc body. The end of the disc is a side flange, which ensures that the ball is not pulled or torn when the ball is released.

　　5, the new dredging design, the unpowered combination scraper clearing the bottom, the clearing blade scraping angle, with the unique treatment technology of the disc body, dredging, good balling effect, no big mud group, the ball diameter 90% At 3-5cm.

working principle:

　　The raw meal powder is made into a spherical core with uniform particle size, and then fed into a spherical disk. After the core enters the spherical disk, it is subjected to centrifugal force, friction and gravity in the disk, moves along the parabola, and continues to roll. The water in the ball is continuously discharged out of the surface. Due to the cohesiveness and plasticity of the material, the core nucleates and gradually grows together with the raw meal during the movement. Due to the cohesiveness of the material and the natural volatilization of the surface liquid film, the ball has a certain strength. When the parameters such as the inclination angle, the height of the disk edge, the rotation speed and the moisture of the ball disc are constant, the balls of different particle sizes roll down from the edge of the disk at different exit angles due to different gravity, and then rotate with the inclined disk body. The outside of the disk is discharged from the side of the disk.

Technical Parameters: