Pendulum feeder

　　Advantage characteristics:

　　Installed under the hopper or funnel to transport materials that do not exceed 50mm in size and are not easy to agglomerate, such as ore. However, it is not suitable for conveying powdery materials, which may cause clogging to affect the feeding, and also cause the powder to fly and affect the cleaning of the workplace. It can also be used as a lock when the machine is not working.

　　working principle:

　　When the motor is started, the power is transmitted through the coupling to the worm gear reducer for deceleration. The decelerated power is transmitted to the adjustable eccentric wheel (the position of the eccentric is adjusted to the size of the ore), and then the eccentric wheel passes through the connecting rod to drive the pendulum bottom plate to make a reciprocating arc swing, and the opening and closing of the ore mouth is repeated from the surface. The ore located in the mine bin above the mining machine enables the ball mill to uniformly feed the material through the inner cavity of the feeding machine and the feeding port, which are discharged at a uniform speed.

1、Feeding body    2、Nameplate        3、Pendulum board       4、Upper axle of pendulum

5、Side panel       6、Gate valve        7、Pendulum bottom      8、Body liner

9、Bracket         10、Pendulum shaft   11、Connecting rod       12、Eccentric wheel body

13、Worm gear reducer 14、Coupling      15、Electric machinery    16、plate

17、Screw         18、Handle           19、Pendulum liner       20、Oil cup

　　Technical Parameters: